Glycol is funny stuff. A buddy piped a glycol system with 2” steel pipe and cast iron fittings. Had leaks everywhere, right thru the castings! I build membrane filtration systems. Did a deicing glycol job. RO rejects 99% of dissolved salt but just 93% of glycol, so we had to do it twice.
little late.. been busy, NOT casting metal.. Andy, that's the beauty of suspendaslurry. I just had my first major slurry fail due to age. The days of mixing slurry 24/7 is gone unless you are running large scale production. I've had success with slurry that's over 2years old. Not too shabby really. A pail of the stuff is 200bucks delivered and the silicas are available cheap in Dallas. Then again, others like to obtain their foundry supplies at homedepot!
I just finished polishing and assembling the side view mirrors. They look good! Thanks for the help, Kelly.
Looks good Jack. I've been following along over at your build thread on the metal shaping forum. Best, Kelly
Jack is finishing up the tail light buckets. Thought I'd post the progress for posterity's sake. The link to his build thread is back in post #1 of this thread for those interested. Best, Kelly
Well, let's see it light up! That's a great line from the top of the light to the bottom corner of the bumper. Very slick.