Hey Kelly, contact me by email, please. ssw357@gmail.com Thanks
I just finished polishing and assembling the side view mirrors. They look good! Thanks for the help, Kelly. [ATTACH] [ATTACH] [ATTACH]
Guys, lets take it down a notch! Here's the way it is; I was clearly headed down the wrong path with next to zero experience with any type of...
The grilles and mirror stands are nearly spotless. One or two very tiny pits on the stands and I sanded a little more and got them out. I won't...
I had some aluminum soldering rods around so I figured I had nothing to lose, so I tried to lay some on the castings. I wet sanded with 600 and...
[ATTACH] [ATTACH]
I did some fitting and polishing on the tail lights. They fit well and polished up pretty good but there's some porosity in the upper 1/3 of both...
Back up sensor bezels polished and test fit. Two down, two to go. [ATTACH] [ATTACH]
Side view mirror stands. As cast on the left. Sanded and polished on the right.[ATTACH]
[ATTACH] Great job, Kelly. Thank you. I was polishing the rear bumper and before I put everything away, I polished one of the front parking lamp...
There are two for the right side. One has some casting flaws, so If I can't save it I'll use the other. Weld the flawed areas then grind and sand...
Thank you. Much appreciated.
The left housing looks good. I can have that welded up no problem. Actually I could have the right one welded up if I have to. I am almost...
I did that. I used a mixture of the dust from sanding the foam and some wood glue. Looks like crap but it filled. I didn't know you could use wax....
Separate names with a comma.
