Just a thought, my experience with high pressure blowers is that the best control happens by restricting the intake rather then the trying to...
I thought I would put in my 2 cents worth here. I process fairly large quantities of aluminum automotive parts into ingots about 7000 lbs per...
I think that you will find it somewhat difficult to get 475kbtu through a 2 " burner with propane or NG. a 2 inch burner normally limits at about...
Wiring diagram for the tilting furnace, this is a Fritzing drawing, I also will share the code if any one wants it. Art B [ATTACH]
The wife went out and helped me video the process, this is a raw video including the finger that kept helping me pour. see the link below...
I do 3 basic size orders 14 lb $55.00, 28 lb $95.00, and 43 lb $130.00, I also have a sliding discount on multiple of the 43 lb boxes. This...
held down, I got tired of hitting the wall. Art b
I direct fire, but i melt 150 to 200 lbs aluminum in 30 minutes without problems, that is burning 5 to 6 gallons per hour roughly 800,000 BTUh...
I ended up moving to Springdale Washington in Stevens county from Spokane to get away from code restrictions, they went to ZERO TOLERANCE air...
When you have the fuel /air correct you will a small amount of flame exiting the furnace/firebox, your picture looks good, you may have a little...
That is very interesting, we also have different fire situation with our foundries in that a spill is not extinguishable until we strip the heat...
gas flow is a product of pressure and orifice size. There are charts available that provide fuel flow with out using metering, Even in...
A burner inside the furnace reduces the amount of air that a naturally aspirated burner can draw due to the back pressure. One of the reasons for...
the flame location in a burner is where the velocity of the fuel mixture slows down to the flame spread rate. The reason the smaller pipe solved...
A properly adjusted burner will put out the same temperature flame as any other properly adjusted burner, if you need higher flame temp as for...
Separate names with a comma.