RANCO-SIL B (30X50) 55 LB BG 44.950 44.95 PREPAID FREIGHT 59.180 59.18 I went ahead and ordered it. Shipping is more than the product but I've...
I'll give it a try. I also RFQ'd some Ranco-Sil. It was $40 for 55 lbs in 2016.
I have not. What is involved in the process? Thanks, Kevin
Pool filter sand does not work. I ran out of Ranco-sil B and found pool sand to be of similar mesh and cheap. 50lbs for $8 at Home Depot. Fired...
I'd gate into the edge of the flange with the runners down and at av45' angle.... How do you recommend I vent it for clean out?
The MAF usually gets eliminated in aftermarket boosted applications. It's just easier to measure elevation at key on and use a MAP. I was...
Measuring what's coming in makes a lot of sense. I've never played with one using a Megasquirt. Practically everything since '96 or earlier has...
This is the motor in my '59. I daily drove this for years with an MS2. No fast idle valve or IAC. I could go outside when it was 8 degrees out,...
I was running fuel and ignition with a Megasquirt 2. I took the VR signal off a late model HEI and fired an MSD box with the MS. This is what I...
I'm still working on the LS intake but I also need some help with the BBC one. None of these castings have been made since you guys helped me out...
I thought I'd give you guys an update. I've been messing with my CNC machine and relearning the CAM software I haven't used in 5 years. Here's a...
AFAIK alcohols are the only thing that dissolves shellac. I don't think modern slurries use alcohol for emissions reasons but something ate my...
I skinned over the holes with shellac and the shellac was smooth. The casting has the layer and support lines visible. Previous castings that I...
Separate names with a comma.