Most recommendations for propane orifice size that I've read is a #60 drill, which is 0.040". Any MIG tip will have a bore several thousandths...
Thanks guys. I'll take a look at sail switches and how to adjust and mount them. Looking at this type currently for ease of install: [IMG]...
Wasn't there a video on this site of a furnace lid thumping, lifting or popping off not that long ago? Don't remember all the details here. I...
So, got to thinkin' and looked up air flow switches for residential furnaces, ductwork and power vents for gas fired water heaters. Adjustable...
That was my first thought but would only cover power loss. If the motor speed controller or blower motor shit the bed there wouldn't be any...
You are correct sir. If I'd walk the 20 feet to behind my garage to take a leak or go in the shop to fetch a tool, that's fairly close and less...
I've been prototyping a forced air propane burner over the winter, getting it dialed in and working one step at a time. Only testing the burner...
Been working on a new forced air propane burner over the winter. Thought it might be cool to see if an air diffuser helped with mixing air/...
I used Bondo brand fiberglass resin painted on the outside of the sono tube. No water intrusion inside the tube and easy release. I used two...
Glad you made it out in time and are OK. I've approached 'knockdown' before with hydrogen sulfide and whatever gas generated by cutting PVC with...
Been doing test prints on the new CR-10 S4. The doggie is a Creality file, it came out great. Used TinkerCAD on the other prints, converted...
Looking good. What CAD program did you use?
Thanks, I was kinda thinking 3-5° that I heard somewhere, somewhere. I just started printing test pieces, ton more to test and learn yet. I will...
I plan to start sand casting aluminum in flat pieces such as plaques with logos and text. I will be 3D printing the patterns in PLA. Design will...
When I start sand casting aluminum in the spring I thought it would probably be best to start flat, as in plaques, license plates, signs etc....
I was going to go with a 4" vent then use a 4" X 3" weld pipe reducer over the vent hole if need be. I stuck w/ a 3" vent tho so I never tested it.
Prices from a seller in my town as posted on FB Marketplace. 300 Gallon IBC Totes starting at just $30!/ $35 uncleaned /$60- cleaned 3x, had...
https://www.steelerubber.com/universal-landing May be something there
I'm rather pleased with this build. Wanted to test orifice distance to 3/4" pipe in air inlet side. Nothing appreciable found by adjusting it's...
Changed out the 1 x 3/4" bell reducer for a straight 3/4" SS coupling on the flare end. The 1 x 3/4" bell would work well using it as a forge...
Separate names with a comma.