Cracked Shell!

Discussion in 'Lost wax casting' started by Kurtis Kiesel, Oct 26, 2022.

  1. Kurtis Kiesel

    Kurtis Kiesel Silver

    PXL_20221027_013849180.jpg PXL_20221027_013845780.jpg I am doing a rush job and a part broke off!

    I used some slurry and a little cigar torch and glued it back on. Then slurry.. sand.. torch... About 4 times on the edge.

    Lets see if I don't pour bronze on the ground through this thing.
     
  2. Kurtis Kiesel

    Kurtis Kiesel Silver

    I guess we will see... PXL_20221027_021844245.jpg
     
  3. Mantrid

    Mantrid Silver

    putting it in place andcoating with more slurry and stuco always works for me. Thre shouldnt be a problem if its thick enough
     
  4. Kurtis Kiesel

    Kurtis Kiesel Silver

    Jason convinced me to add some ss wire too. PXL_20221027_035147479.jpg
     
  5. Zapins

    Zapins Gold

    Ya been there done that several times. No issues. It will be fine.
     
  6. Kurtis Kiesel

    Kurtis Kiesel Silver

    Tobho Mott and Jason like this.

Share This Page